1. |
Why are LandRollers better than in-lines?
LandRollers are superior for several reasons:
- Oversized wheels provide a smoother, chatter-free ride and enable LandRollers to roll over small obstacles.
- Patented "out-of-line" wheel configuration provides superior stability that makes skating more fun and easier for beginners to learn.
- Experienced skaters are able to skate on a wider variety of surfaces. Please note that extremely rough and abrasive surfaces will severely limit wheel life.
- Skaters can more easily lift their toe to apply force onto the brake pad, thus generating greater stopping power.
- Patented wheel configuration enables sharper turns and provides superior control.
- Wheels and bearings can be replaced with a single screw, making replacement far simpler and faster than any other skate.
Skaters from every level of ability are delighted by the unique benefits of this amazing technology. |
2. |
Are LandRollers really "out-of-line" skates?
The wheels on LandRollers are not inline. Rather, the two large angled wheels contact the ground in such a way that they are parallel, but offset. A wider wheelbase results in greater stability than inlines. |
3. |
Why are the wheels angled, and only on one side?
Only by using LandRoller's angled wheel technology (AWT) can large wheels be mounted on skates while maintaining a short wheelbase and keeping a low center of gravity. In this way, skating dynamics are maintained even with large wheels.
In the past, other skate companies have attempted to capitalize on the advantages of larger wheels, but have failed. Inline skates with very large wheels under the boot raise a skater’s center of gravity too high off the ground and places too much torque on one's ankles. Placing a boot hung low between large wheels fore and aft limits control and maneuverability because the wheelbase is too long. Since mounting large wheels under or front and back doesn't work, the only other possible configuration is to place wheels on the sides. If large wheels are mounted on both sides of a boot, a skate becomes unwieldy and maneuverability is severely hampered. If wheels are mounted on only one side of a boot, they must be angled so that the ground contact points are under the boot to provide balance and stability. |
4. |
Can I jump and “grind” with my LandRollers?
LandRoller Terra 9 skates are designed to be fitness/recreational skates. They are not designed to be an "aggressive" skate. Jumping and grinding should never be attempted with the Terra 9 models. |
5. |
How do I know what size to order online?
LandRoller skates follow traditional shoe and boot sizes. For example, if you wear a size 10 sneaker or inline skate, you should be quite comfortable in a size 10 LandRoller. Our boots are adjustable and can accommodate a broad range of foot widths. If you sometimes wear a size 9.5 in some brands and a size 10 in other brands, we suggest that you select the larger (10) size.
 |
6. |
|
7. |
Are there any technique changes required to skate on LandRollers?
Inline skaters can easily make the switch to LandRollers. However, minor technique adjustments are required to optimize performance. For example, skaters can turn more sharply on LandRollers by lifting the front wheel of their forward skate and pivoting on the axis of the rear wheel. Advanced skaters may need 20 to 30 minutes to modify their turning, push-off and crossing-over techniques in order to match their advanced skill level. Generally, beginning skaters will find it easier to learn on LandRollers due to superior stability, lack of chatter, and an ability to roll over small bumps and cracks. New LandRoller skaters should avoid looking down at the angled wheels because they may subconsciously try to straighten them. Doing so can be uncomfortable and hinder performance. |
8. |
How much do LandRollers cost?
Although LandRollers are superior to traditional skates, the pricing is not out-of-line. The suggested retail price in the United States for the Terra 9 model is $249.99. To purchase a pair of LandRollers, go Here |
9. |
Are LandRollers available in large shoe sizes?
The largest size currently offered is men's U.S. size 12 (equivalent to European size 46; UK size 11 or 30 cm.). The largest women's size is U.S. size 11 (equivalent to European size 44; U.K. size 9 or 28 cm.). Women can choose to wear our men's skate. In the U.S., a women's shoe size is equivalent to one full size less In men's. For example, a women's U.S. size 12 is equivalent to a men's U.S. size 11. There are currently no plans to make LandRoller skates in larger sizes. |
10. |
|
11. |
How long will a LandRoller wheel last?
Wheel life depends on the amount of use, skating style and skating surface. Front wheels will wear faster because they are smaller than the rear wheels. Please be aware that skating on rough asphalt and other coarse surfaces will reduce wheel life significantly. |
12. |
Can I use my LandRoller offroad?
The Terra 9 model is not designed for off-road use. They provide a smoother ride over more surfaces than inlines. Please bear in mind, however, that skating on rough surfaces will shorten the life of your wheels. |
13. |
How do you stop when skating on LandRollers?
All LandRollers have a brake arm and replaceable brake pad attached to the heel of the right skate. The brake arm can be moved to the left skate, if desired. This braking system works similar to those on most inline skates. We recommend that you never skate without a brake even if you have mastered other braking techniques such as "T" stops or hockey stops.
To brake, place your braking skate leg forward and lift your toe. Apply force to your heel in order to cause the brake pad to contact the ground surface. The harder you press, the faster you will slow down or stop. Experienced skaters may prefer to employ "hockey" stops, tight turning stops, and "T" style braking maneuvers. |
14. |
How long is the warranty on LandRollers?
New LandRoller skates are warranted to be free from defects in materials and manufacturing for a period of six (6) months from the date of purchase. For additional details, please refer to the LandRoller warranty here. |
15. |
|
16. |
Where are LandRollers manufactured?
LandRoller skates are assembled and packaged in Bangkok, Thailand at one of the premier, state-of-the-art skate manufacturing facilities in the world. Several components are fabricated in Taiwan. Our urethane tires are produced by Bravo, the world's leading skate wheel manufacturer, best known for the Kryptonics, Hyper and Senate wheel brands. |
17. |
|
18. |
How much do LandRollers weigh?
A U.S. size 10 men's LandRoller Terra 9 skate weighs about 4 pounds 4 ounces (just under 2 kilograms), which is slightly more than a typical inline skate |
19. |
How often do wheels need to be rotated?
The wheels and tires on LandRoller skates are asymmetrical and cannot be "reversed" on the same axle. Reversing a wheel's position on the same axle should never be attempted. Rotating wheels from the left skate to the right skate, or vice versa, is generally not necessary but wheels may be swapped to compensate for uneven wear patterns from "T" style braking and individual skating style. |
20. |
How often must the bearings be changed?
LandRoller's Terra 9 skates come equipped with oversized bearings that are press fit at the factory and should not be removed. They are more robust than traditional inline skate bearings and should last for many kilometers of use. |
21. |
|
22. |
Do LandRollers need to be "broken in"?
The bearings on LandRollers Terra 9 skates are packed in grease. Skating a few kilometers breaks down the viscosity of the grease resulting in a smoother and longer glide. |
